12 Ton Crane Truck & Truck Mounted Crane
By chenglizhuanqi
We support custom services such as various modifications and assembly of trucks. Just contact us and let us know the type of truck you need and your assembly needs. We will provide you with your own custom truck.
Vehicle Model: DFV5243JSQGP6D
Dongfeng Changxing rear eight-wheel D3 luxury cab, Yuchai 270 horsepower, National VI engine, wheelbase Shaanxi gear 9-speed gearbox, 5T front axle, 10T double rear axle, tire 11.00R20, beam 300mm straight to three layers, with original factory ABS, electric glass, lower protection, airbag seat, central control lock, LED daytime running lights, with original air conditioner, driving recorder, multi-function steering wheel, with special power take-off for onboard crane and remote accelerator, with new regulations, compartment Size: 8300mm*2450mm*550mm
The body is equipped with a 5-section straight arm crane with a weight of 12 tons from Chengli Special Automobile, a high-altitude seat operation, a military double pump, a double front outrigger, and a 150L radiator, a work light, one-button start and stop, and an over-roll alarm.
1. Introduction and main parameters of the whole machine:
Chengli Zhuanqi brand KNSQ1205 truck-mounted crane is a new generation of high-performance product independently developed by our company to meet the market demand and integrate many years of experience and advanced technology. The performance parameters such as lifting height, main boom length, working speed, and lifting capacity of the crane are all at the leading domestic level.
-
The luffing, slewing, telescoping, hoisting and other mechanisms of this product are operated in four directions, manually controlled, hydraulically driven, and the crane arm head is equipped with vertical work lights, wire boxes, and other devices; the crane has the advantages of light operation, flexibility, stable and reliable work, Features such as Stepless speed regulation
-
In the hydraulic system, there are safety devices such as a safety valve, balance valve, hydraulic lock, over-roll alarm, etc., to prevent the occurrence of accidents caused by the overload of the oil circuit and the rupture of the oil pipe.
-
The crane is equipped with complete lighting devices on the boom head and the column, which is convenient for night operation.
-
The slewing reducer of the crane is a planetary walking structure, which ensures the self-locking function. The whole vehicle is equipped with slewing fixing and outrigger fixing pins, which ensures the safety of the whole vehicle when walking.
-
The design, manufacture, and quality inspection of Chenglizhuan's KNSQ1205 crane meet the requirements of QC/T459 "On-board Hoisting Vehicle".
1.1 Product Model:
Model number: KNSQ1205
Working temperature: -15℃~40℃
1.2 Main technical parameters:
Item | Values | Remarks | |
Working performance parameters |
Maximum rated total lifting weight(kg) |
12000 |
2.5 meters range |
The maximum lifting moment of the basic arm(kN m) |
300000 |
||
Maximum lifting height of basic boom (m) |
<6 |
without chassis Boom deformation is not considered |
|
Maximum lifting height at full extension (m) |
19.5 |
||
Boom lifting time (s) |
<20 |
||
Boom extension time (s) |
<25 |
||
Maximum rotation speed (r/min) |
<2.5 |
||
Other parameters |
Weight (kg) |
<5500 |
|
System flow (L/min) |
60 |
||
System pressure (MPa) |
24 |
||
Hydraulic tank volume (L) |
≮150 |
1.3 Lifting parameters:
2. Description of each part of the crane:
2.1 Rack and outriggers:
The outrigger of the crane is an H-shaped structure. After the horizontal cylinder is fully extended, the outrigger span is 6000mm; a one-way hydraulic lock is installed on the vertical cylinder of the crane; The outriggers will not retract or fall during operation and driving; the horizontal outriggers of the crane are four-sided box-type structures, welded with high-strength steel plates with a yield strength greater than 700MPa, and a manual locking device (or hydraulic pressure) is installed on the horizontal outriggers. Locking device) to ensure that the outriggers of the crane will not be thrown out due to excessive speed when the crane is driving.
2.2 Rotary Part:
The rotation is realized by the planetary reducer driving the internal tooth slewing bearing; the mechanism is mature and reliable, with a large reduction ratio and large torque; the planetary reducer has its own self-locking function, and the gear head is solid quenched and tempered, which greatly improves the life of the entire mechanism.
2.3 Central RotaryJoint:
The outer shell of the central rotary joint is made of cast steel, the inner shell is made of steel, and nine rotary seals and two sets of guide rings are installed in the middle to ensure its durability and sealing; It is manufactured by the company in 2010, and the annual usage in China is not less than 5,000 sets, and the technology is mature.
2.4 Column:
The section of the column is a five-frame box-shaped structure, which is welded with high-strength steel plates with a yield strength greater than 700MPa. There is a circular fastening hole on the column. When the socket head cap screw at the connection between the rotary drive and the frame is loose or needs routine maintenance, the circular hole can be used to fasten the screw. This hole is usually covered by a small cover plate.
2.5 Luffing Cylinder, Balance Valve:
The crane's luffing hoist adopts the traditional three-point structure. After nearly 20 years of design and optimization by our company, the mechanism is safe and reliable, and the force arm is large; the luffing cylinder is an articulated cylinder at both ends, the bottom of the cylinder and the head of the rod The oil-impregnated bearings are installed with powder metallurgy, which can withstand high temperature and high pressure. During use, it is necessary to add yellow grease regularly to prevent dry grinding from damaging the oil-impregnated bearings; the structure design in the hydraulic cylinder is advanced, and the common design in the crane industry is adopted. Multiple guide rings are installed on the piston and guide sleeve to increase the service life of the hydraulic cylinder; the material of the hydraulic cylinder is quenched and tempered material, which can ensure the working pressure under the condition of weight reduction.
The balance valve on the luff is a one-way balance valve, which ensures the safety of the luffing cylinder when it is used (restricts its descent) and ensures that the luffing cylinder will not vibrate when it descends.
2.6 Boom Telescopic Mechanism:
The telescopic boom adopts a single telescopic oil cylinder with a pulley block to realize the telescopic boom of the boom. The boom has 4 sections in total. The telescoping of the second arm is controlled by the telescopic cylinder, and the telescoping of the third and fourth sections is realized by the wire rope installed on the boom or the cylinder. The mechanism is stable and reliable, with fast telescopic speed and high operating efficiency. The boom is lightweight, which increases lifting capacity even when installed.
A one-way balance valve is installed on the telescopic oil cylinder to ensure the safety of the telescopic oil cylinder during use (restrict its recovery) and ensure that the telescopic oil cylinder does not vibrate when retracting.
The boom head of the boom is equipped with an over-roll alarm and a vertical lighting work light. The voltage is DC 24V, which is safe and waterproof.
2.7 Hydraulic Multi-way Valve:
The main operating hydraulic multi-way valve adopts the multi-way valve imported from Europe. The multi-way valve has mature technology and good reliability, which can make all the movements of the crane stable and the speed controllable; the outrigger hydraulic multi-way valve adopts five control and eight control. Multi-way valve, the multi-way valve is a product with mature technology in China, and more than 2,000 sets have been tried on our company's products.
2.8 Hydraulic Winch:
The hydraulic winch adopts mature technology inside and outside. The hydraulic winch has large lifting torque and stable movement. The hydraulic winch drive motor is equipped with a one-way balance valve, which has good micro-control performance, stable braking, and low noise during use.
2.9 Auxiliary Rear Outriggers:
The auxiliary rear outrigger is a single-chamber hydraulic telescopic rear outrigger with a maximum deployment span of 3.2 meters and a height of more than 300mm from the ground, which is convenient for the crane to travel on uneven roads.
2.10 Operating System:
The main multi-way valve (mainly controlling slewing, telescopic, luffing, and hoisting) adopts upper operation and can be operated by sitting on the frame, which ensures the comfort of operation; the auxiliary operation multi-way valve (mainly controls the front and rear outriggers) It is operated on both sides of the vehicle with good visibility and can prevent misoperation.
2.11 Security:
-
Warning signs are set at the pin connection of the crane, the boom head, and the rear side of the slewing column.
-
The horizontal outriggers are provided with locking devices to ensure that they will not be thrown out during driving; hydraulic locks are provided on the vertical cylinders to ensure that the outriggers will not retract or fall during operation and driving.
-
The hoisting and luffing cylinder is equipped with a balance valve so that it will not vibrate during locking and expansion; the balance valve on the cylinder has a throttling function, which can control the movement action
-
An anti-dropping device is installed on the hook; in the driving state, the rotating part can be fixed on the base by the rotating fixing pin, which ensures safety.
Main configuration list:
No |
Part Name |
Manufacturer |
Remarks |
1 |
Multi-way Valve |
Turkey Akon Paikesa | |
2 |
Main Oil Pump |
Jinan Zhenhai Hydraulic Pump Co., Ltd. | |
3 |
Rotary Reducer |
Tai'an Zhihe |
|
4 |
Slewing Bearing |
Xuzhou Saiyue Construction Machinery Co., Ltd. |
|
5 |
Telescopic Cylinder |
Jiangsu Tongde Hydraulic Co., Ltd./ Hunan Hengli Hydraulic Co., Ltd. |
|
6 |
Luffing Cylinders |
||
7 |
Horizontal cylinders |
||
8 |
Vertical Cylinders |
||
9 |
Telescopic Balance Valve |
Yangzhou Zhongmei Hydraulic Co., Ltd./Xiangtan Ruilong Hydraulic Co., Ltd. |
|
10 |
Luffing Balance Valve |
||
11 |
Lift Balance Valve |
||
12 |
Hooks |
Homemade | |
13 |
Over-roll Alarm |
Changde, Hunan |
|
14 |
Hydraulic Winch |
Jining Weide Hydraulic/Taian Zhihe |
Technical parameters of SQ12SA4 Chenglizhuan truck-mounted crane:
Crane Model |
SQ8SA3 (8 tons four-section straight boom) |
|||
Maximum Lifting Weight (kg) |
12 | |||
Maximum Lifting Torque (n.m) |
30 | |||
Sectional Form |
Pentagon |
Rotation Mechanism |
speed (r/min) |
2 |
Number Of Knots |
5 (extension of four knots) |
range(°) |
360(optional) |
|
Length(m) |
5.4-18.18 |
Leg | Type |
H-type outrigger |
Maximum working radius (m) |
18.18 |
Span (m) |
2.5-7.6 | |
Extension speed (m/s) |
0.19 |
Hydraulic System |
System pressure (Mpa) |
21 |
Amplitude range |
1-72 |
Fuel tank volume (L) |
150 | |
Boom Angular Speed(°/s) | 3.2 |
Safety device |
Over-roll alarm |
|
Maximum lifting height (m) |
19.5 | Weight (kg) | 5000 | |
Hook lifting speed m/min |
8 |
Installation space |
1250mm | |
Wire rope diameter mm |
12 | |||
Wire rope length m |
115 | |||
Match Truck | Trucks with a loading mass of more than 10 tons |
Lifting Capacity Comparison Table:
Working radius (m) |
2.5 | 5.5 | 8.5 | 11.5 | 18.3 |
Rated load (kg) |
12000 | 5130 | 2660 | 1420 | 500 |