D9-Eighteen Cubic Compressed Garbage Truck & Trash Vehicles

Whole Truck Configuration：

Chassis Configuration:

Dongfeng Duolika D9 chassis, Cumingqi 230 horsepower, 5000mm wheelbase, Shaanxi tooth eight-speed gearbox, 153 rear axles, 1000 steel wire tire, original air-conditioning electric glass, airbag seat, steering assist ABS, etc.

Top Loading configuration:

Functions Introduction:

The volume of the container is 18 cubic meters, which is used for loading domestic garbage. It is composed of a sealed garbage container, a filler, a push shovel, a hydraulic transmission system, and an electrical control system. The whole vehicle is a fully enclosed type, using electro-hydraulic integration technology, with the help of mechanical, electrical, and hydraulic joint automatic control system, through special devices such as garbage cans, fillers, and push shovels, to realize garbage pouring, crushing or flattening, Powerful lifting and filling, squeezes garbage into the carriage and compacts and shoves. All the sewage in the compression process enters the sewage tank, which solves the problem of secondary pollution in the process of garbage transportation. Users can choose different bucket turning mechanisms according to different garbage collection methods: standard garbage iron bucket ZBT59003-88 (300L ), plastic trash can (240L), plastic trash can (660L), and can also be equipped with triangular bucket, large floor bucket garbage bucket, swing arm garbage bucket, and other turning mechanisms. An optional pneumatic sealing cover is available.

Main performance and features:

1. The container is made of reinforced beams and high-strength steel plates welded into a solid frame structure, made of high-quality Q345 special steel of WISCO, with five sides and five bottoms, and the overall side plate of the curved container body, is beautiful in appearance, good in force and no deformation; push shovel It is composed of a rectangular tube skeleton and a folded panel, which is not only light in structure but also distributes waste evenly and discharges cleanly and thoroughly.
2. The welding seam of the container body adopts the first robot automatic welding process in China, which does not scrape dust or leak water.
3. The key components of the electro-hydraulic system adopt well-known brands: assembly of Jiangsu Zhongmei/Weisenbole multi-way valve, Anhui Anhui/Changyuan hydraulic oil pump, Siemens PLC control system (optional CAN) (two control boxes in total) with remote control, Jiangsu Feida / Hubei Boli hydraulic cylinder. All seals of the oil cylinder adopt the HALLIE brand imported from the UK to ensure the service life of the oil cylinder. In the hydraulic system that lifts the loader, a two-way balance valve is installed. The valve not only ensures the smooth descent of the filler but also cuts off the direct connection between the lift cylinder and the hydraulic hose. Even if the hose bursts, the filler will not drop suddenly, which improves the safety of use.
4. The tail feeding and turning mechanism are widened and thickened, the shaft sleeve of the turning mechanism adopts the quenching process, and the main pin of the turning arm adopts the through-through double-sided welding process, which is sturdy and durable and will not break.
5. The filler assembly is mainly composed of the filler housing, the slide plate, the scraper, and other components. The filler slideway is formed by cold bending of high-strength wear-resistant materials. The two sides of the slide plate are made of integral nylon sliders, which are self-lubricating. , high stability, easy maintenance, and better wear resistance; the force-bearing parts of the scraper are locally strengthened, and the structure is firm. The lower arc-shaped plate is made of high-strength wear-resistant material, and the arc-shaped plate is machined with a water leakage port, which is convenient for the sewage inside the filler to flow into the lower sewage storage tank, so as to avoid the leakage of sewage during transportation. The lower part of the filler is equipped with a large capacity Sewage storage tank, there are galvanized sewage discharge ports on both sides of the sewage tank.
6. Advanced electronic control system: It adopts imported PLC (Programmable Logic Controller) integrated control, adopts a logic circuit to ensure that each operation command is executed in sequence, and at the same time ensures the interlock between each operation command, which reduces the failure rate and improves reliability. ; Automatic control of engine power output: The engine power output control, that is, the throttle control, can be fully automatically controlled through the electrical system to meet the power requirements of the garbage filling cycle and pushing and unloading. In other working conditions, the engine is automatically in an idle state. , which can reduce power loss and failure rate, reduce fuel consumption and improve economical use.
7. Convenient operation control, the operation control box is installed in the cab and on the right side of the rear, with an emergency stop button on the left side, equipped with remote control, the operation control box in the cab can control the pushing and unloading and select the operation mode (such as automatic or Manual), the operation control box at the rear of the car controls the operation of the pressing and filling mechanism and the barrel turning mechanism, which is very convenient to use and operate. The work of each organization has three operation modes: automatic, manual, and remote control. If the automatic operation fails, the organization can be manually operated to complete the operation and unload the garbage.
   Ensuring the efficient work of the garbage truck
8. Double sewage collection tank design, sealing treatment, eliminating secondary pollution, unique sewage valve installed on the sewage tank, reliable sealing, not easy to block.